Cold Drawn Seamless Honed Carbon Steel or Alloy Steel Tube for Hydraulic Cylinder Barrel

Cold Drawn Seamless Honed Carbon Steel or Alloy Steel Tube for Hydraulic Cylinder Barrel

Part I: Product INTRODUCTION
1. Description: 
Honed tube is a kind of easy bore steel tube used to manufacture hydraulic cylinder barrels that is the main part of a piece of hydraulic cylinder. 

2. Commodity: Cold drawn seamless honed metal tube

3. Measurement variety: 40mm*30mm-580mm*500mm

4. Offered steel grade: 

SAE/AISI:  SAE1571, SAE1026, SAE1045, SAE4130, SAE4140
DIN:  ST52, ST52.3, ST52.four
EN:  E355, C45E, 25CrMo4, 42CrMo4, CK45, S45C, E410, E470
GB:  twenty#, 45#, 16Mn, Q345B, Q345C, Q345D, Q345E, 25Mn, 27SiMn, 

five. Manufacture approach: Cold rolled, hydraulic cold drawn, sizzling rolled+deep hole uninteresting

six. Supply situation: 

BK BKW BKS GBK NBK Q+T
+C +LC +SR +A +N
Cold rolled Cold drawn Anxiety relieved Annealed Normalized Quenched+Tempered

7. Bore remedy: Honing, skiving&roller burnishing

8. Bore roughness control: Ra0.25um max or Ra0, 35um max for honed tubes, Ra0.25um max for skived&roller burnished tubes. 

9. Conclude end: Plain finishes with square cuts, cost-free of burrs for honed tubes. Small bevelled finishes for skived&roller burnished tubes. 

10. CZPT export packing: In bundles tied with metal strips. Int&ext oil coating. End plastic caps. Exterior packing by PVC bags and knit baggage. 

11. CZPTized packing and marking can be offered upon request. 

12. H8 tolerance: 

ID selection Tolerance ID assortment Tolerance
18< d ≤30 +/+.033 180< d ≤250 +/+.072
thirty< d ≤50 +/+.039 250< d ≤300 +/+.081
fifty< d ≤80 +/+.046 300< d ≤315 +/+.081
80< d ≤120 +/+.054 315< d ≤400 +/+.089
a hundred and twenty< d ≤180 +/+.063 400< d ≤500 +/+.097

thirteen. Difference among honed tube and skived&roller burnished tube: In hydraulic cylinder market, there are 2 solutions for bore treatment: Honing, and skiving&roller burnishing. Honing or skiving&roller burnishing qualified prospects to distinct internal surface graphic, but the two make sure great roughness. 

Internal Surface area Situation OF HONED TUBES:

Inside Surface area Condition OF SKIVED&ROLLER BURNISHED TUBES:

Element II: Usually Asked Queries
1. MOQ: 
CZPTly Min Purchase Amount can be 2-3 tons/measurement for tubes with OD underneath 250mm, and ten tons/measurement for tubes with OD above 250mm. Often, it depends on metal quality you need. If you want particular quality like E410, E470 or alloy steel tube, MOQ need to be 10 tons/size at minimum. 
two. Delivery Time: CZPTly, our shipping and delivery time for honed tubes is around forty-sixty days depending on the measurements and portions. It will consider us fifteen-thirty times to get uncooked content. For instance, if you want 3 tons of little measurement honed tubes 50mm*40mm with roughness of Ra0.25um max, it will consider us at least thirty days to hone this dimensions. 
three. Warranty&Guarantee: Guarantee&promise period of time is 6 months considering that we provide the tubes, and we are not dependable for top quality problem triggered by wrong unloading or storage right after shipment. We welcome customer’s inspection prior to shipment. 
four. Payment Strategy: We settle for payment technique like T/T, L/C, or D/P, but it relies upon on our investigation about consumers. We have a solution to assess the credit score of buyers from all above the entire world, and time and sum of D/P we can release is identified by the analysis. 
5. Good quality Management: ninety% of the tubes are produced from hot rolled seamless pipes. So, good quality of uncooked substance identified top quality of concluded tubes. We obtain uncooked content from stable suppliers who are major metal mills, and we inspect the uncooked materials as for each the requirements. Throughout our generation process, there is inspection and good quality handle in each and every phase. 

Component III: Firm INTRODUCTION
We are a manufacturer of cold drawn, cold rolled, and hydraulic chilly drawn metal tubes with OD upto 356mm considering that 2002. Masking an region of about 32000M2, we have twelve regular workshops with 2 hydraulic chilly drawing benches, 4 chain cold drawing benches, and 2 ERW mills. Our services handles all the creation procedures from pickling, chilly drawing, warmth dealing with, saw chopping, straightening, inspection, packing to further machining &turning, cold drawing die fabrication, and products repairation&servicing. 

Manufacturing unit Visual appeal:

Uncooked Substance Stock:

HYDRAULIC Chilly DRAWING:

MULTI-ROLLER STRAIGHTENING:

STRAIGHTENING BY Push:

Observed Reducing:

LATHES:

HONING:

DEEP Gap Uninteresting/DRILLING:

SKIVING&ROLLER BURNISHING:

 

Cold Drawn Seamless Honed Carbon Steel or Alloy Steel Tube for Hydraulic Cylinder Barrel